2008 Toyota RAV4
Mileage
159,282
Service Date
6/3/2022
Services Performed
- Perform a sequence of test to find the cause of the problem
- oil,filter+lube/inspect
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [Includes: Calibration.] – [DOES NOT include disassemble or alignment.]
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [Includes: Bleed Brake System (where applicable). DOES NOT include disassemble or alignment (where applicable).]
- Replace front brake pad linings and Replace front brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. . Road test vehicle.
- Replace rear brake linings. Inspect condition and thickness of rear brake disc rotors. Retract rear brake caliper actuators. Clean and lubricate rear brake caliper slide mechanism. Adjust parking brake. Road test vehicle.
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- If any wheels were removed for service/ repair, RECHECK lug nut torque after 100 miles!! Alloy wheels can loosen or seat in requiring tightening of the lug nuts Brake % are brief visual estimates Link to electronic inspect
Sharon M. gave our service a 5 star review on 6/3/2022
